Pharma Centrifuge System Automation Using VFD

Categories

Summary:

VFDs allow the user to slowly bring the centrifuge up to speed, greatly reducing the mechanical stress on the motor, bearings and bowl. They provide better process and speed control. When starting a very large mass with short acceleration time, the VFD most likely goes into over-current and trips. For this system the drum is used to rotate at certain speed using the VFD.

Solution:

A centrifuge is a device that spins liquid samples at high speeds and thus creates a strong centripetal force causing the denser materials to travel towards the bottom of the centrifuge tube more rapidly than they would under the force of normal gravity.In the preparation of the item a recipe is followed, for which a centrifuge is used. All the raw materials are dumped into the centrifugal machine and is rotated at a speed. In order to maintain the speed a VFD installed. By using this VFD the speed of the centrifuge is either increased or decreased according to our requirement.

Pharma Centrifuge System Automation Using VFD project

Customer Benefits:

  • Easy of operation
  • Good productivity
  • High Performance
  • All readings can be log easily

Technologies:

  • VFD

Conatct Us

Email

contact@stabilitygroup.in

Phone

 +91 9030070085

+91 7801063999

Address

#501C, Bankers Chambers,
A S Raju Nagar, Kukatpally,
Hyderabad Telangana -500 072.

This entry was posted on June 14, 2020 by Admin

Conatct Us

Email

contact@stability.co

Phone

For Enquires : +91 9100451116/7/8

For Technical Support : +91 9030070085

Address

#122/P&123/P, 1st Floor,
MG's Brindavan, Beside More Supermarket,
Gajularamaram, Hyderabad
Telangana -500 055.